Hey Tony,

I saw your sale and jumped at the opportunity (to buy my MCCruise for the Yamaha FJ-09). The shipping was lightning fast! I did the install two days ago and just had to drop a line to let it you know the CC works flawlessly. It is absolutely amazing. And I have to compliment you again on the thoroughness of your installation instructions. It took a while, but the steps are so detailed and easy to follow with nothing left out. I'm very impressed with the whole package, to say the least.

Thank you again for such a great product and service! Ride on!

Michael - Plain City Utah - 12 March, 2018

Approximate cost: $600

Good day Australia !!!
Just a quick update on the cruise control on my wife's Dyna. We finally got a nice day for her first test ride with your cruise control on her bike and it works flawlessly for her. She is very happy with the performance - as was I when I tested it.

I want to again thank you both for your support. I wouldn't be surprised if you receive more orders in the future from the Wichita area.

Dwight - 10 March, 2018

Approximate cost: $1000

Hi Tony,
Just had to tell you: Loving the cruise on my ST1300. Ha ha what a joy!
Getting the hang of using my right hand after many years of holding the throttle open. The MCCruise holds steady and smooth as silk when I engage it.
Mighty!
Cheers, Ian - 26 February, 2018 Tuckombil, NSW, Australia

Approximate cost: $1200

Tony,
just a quick note to say, I received the Mccruise control for my Yamaha MT09 Tracer the morning of Tuesday 20th, the easy to follow instructions had it fitted and calibrated in about 5 hours during the afternoon including removing and replacing the Yamaha plastics and two cups of tea.

I went for a 560km test ride the next day (yesterday) and everything works very well, it's hard to imagine how you could possibly improve something that works this well, I can't think of a single thing I would change to improve anything, it just works, it's perfect,

Thanks again and well done on creating an excellent product mate.

Best regards,

Phil - Ulverstone, Tasmania 22 February, 2018

Approximate cost: $720

G’Day Frank

Thank you very much for your help to solve the problem with my cruise control, your explanation and the Manuals & documents you sent were extremely help full without them I would still be riding around without the cruise working. The first check was the vacuum hose which was in perfect order, so then following the instructions in the manual I removed the Actuator Solenoid Valve Pack to check and clean, The needle in the vacuum Solenoid was stuck closed and needed a gentle tap to remove it. So after a clean with cotton buds and metho I reassembled and road tested. I’m happy to say that the cruise is back working again as new.
Thankyou again
Cheers
John 3 February, 2018 Somewhere in Oz

Hi Tony,

RE: ST1300 MCCruise control failure.

As I said I removed the Vacuum unit and cleaned the solenoids as per your instructions sheet. I also did the diagnostic test which was as per the sheet and that came out OK. This morning I took the bike for a ride and it is working perfectly. I appreciate your patience and help Tony. I would certainly recommend you to anyone looking for a cruise control. You are free to put the following review on your website:

"I have a Honda ST1300 (2007) which had been fitted with a vacuum cruise control originally purchased from MCCRUISE. The unit failed a few weeks ago and I rang Tony for some advice. He spent a good 20 minutes on the phone trying to diagnose the problem - I might add he did this while on Christmas Holidays. He couldn't resolve it over the phone and I took the bike across to Mt Waverley yesterday. Tony did some diagnostics and had the problem diagnosed in no time at all. I am delighted with the service and cost, and I would recommend MCCruise to anyone without hesitation."
Thanks again Tony,

Regards

John - 1 February, 2018 Melbourne, Victoria Australia

Approximate cost: $25

Firstly, I love it when things just do exactly what they say they will. This cruise control is such a one. It truly is "plug and play". The very detailed instruction booklet contained everything I needed to fit the control to my bike (KTM 1190 Adventure R). The instructions would allow someone who had never worked on their bike before to successfully connect up the control box. It even included advice on which parts of the bike's wiring may be hard to get at or tricky to get out of mounting clips.
When I ordered, there was a problem with the type of control box for my bike. Even though the problem was outside their control, the team at MC Cruise were very apologetic and kept me up to date with progress. Eventually, the kit arrived sooner than they had indicated and it was despatched straight to me.
I had to contact the office with an issue while setting up (you really do need to make sure all those little terminals are fully pushed into the connector!). Steve was very helpful and we had the problem solved within minutes. The cruise control has tested perfectly at all speeds I am likely to do. My only comment would be that it is slightly less subtle in controlling the throttle as we come over a crest and drop down the other side. Not too bad, just noticeable.
This is the third MC Cruise I have installed (Suzuki Burgman 650 and Triumph Tiger 800). All have been of the highest quality and done exactly what it said on the box. I cannot recommend them highly enough.

Honda CTX700 owner, 2018

I'm a returning customer. Seven years and over 100,000km ago the guys from MC Cruise fitted a cruise control to my Suzuki Burgman AN650. As I live in the same city as MC Cruise headquarters, I paid the extra to have them fit it. I loved my Burgman, but it was a pain to work on because of the complicated body work. I watched them fit it and was impressed with their workshop as well as their workmanship. The end product worked spectacularly and out-lived the bike. I used it every day & loved it. Not just that it probably saved me from a hundred speeding fines, saved fuel on long hauls & saved wrist muscles - it just made every ride more relaxing & more fun.

I've just had MC Cruise fitted to my replacement bike, a CTX700 cruiser. I got a discount in return for leaving my bike with them for a week while they documented the fitting process specific to my model. It works beautifully. I expected no less.

Perhaps the most telling testimonials are those involving things going wrong. My latest installation was not without incident. While the cruise control worked perfectly, I was absolutely certain that my speedo error increased from 6% to 17%. It turns out that when I had the chain and sprockets changed over 1000 km earlier, they fitted the wrong size rear sprocket. The speedo error only came to my attention because I got a ride from a friend to pick up the bike and after following her home I accused her of speeding... yes I still find it embarrassing. My point is that Tony and Frank remained professional and were very generous with their time. Their product speaks for itself. I cannot recommend them enough.

Robin - Australia. January, 2018

Approximate cost: $1160

Hi Guys, I fitted my cruise in April 2017 to my older 2005 FJR1300 and its been so great. I am a bit old and slow and finally got around to doing the calibrations. (Jan 2018) It had been working really well and i thought it was really good, straight out of the box. However, I went thru the calibrations and just tweaked a few things, set speed increments to 1 instead of 3 and that's real handy when following my mate, can match the speeds a lot closer. I also adjusted the set time response, now its instant. Also set the speed response and it doesn't lag anymore. Back in April I thought what a great product, now after calibrations I think bloody fantastic. If i can offer advice to future buyers, don't wait as long as I did to do the calibrations..:) As far as the quality and service from these guys, exceptional. Kit was superb, instructions were thorough and concise. The cruise is going to be a great help when i cross the Nullabor.
Thanks to the team at McCruise, well done!!

Approximate cost: $1100

Just wanted to let you know that I bought a CC for a Honda Africa Twin from you, fitted it myself, your instructions were excellent, and it worked perfectly with only minimum set up needed. Just thought I would say thanks for a quality item

Phil Australia

Approximate cost: $1190